332 / 878
Premier–1–44
Solid Wood Doors
Any product that is exposed to moisture will show separation at the
joints.
Light lines at edges of center panel
are common on solid wood doors
Veneer is thin slices of wood that are glued to furniture board. Since no
two trees are exactly alike and even the same tree will have variations
due to limbs and growth interruptions, there will be differences in
the grain and color of the wood. Our veneer products are made from
real wood and will have the same grain patterns, color variations and
textures as the wood the veneer is made from. Therefore, each piece
of veneer, each cabinet and each kitchen will be unique and beautiful.
The soft edges of the Milan and Barcelona doors are created by
applying a
1
⁄
8
” thick solid wood edge. Certain stains may show a slight
line between the door panel and wood edge. This is an acceptable
level of quality for these doors and finish combinations.
Veneer Center Panels
Milan and Barcelona
Miter doors will show separation and peeling in the joints at the
door corners. This characteristic is the result of environmental
factors beyond manufacturer’s control and is not considered a defect.
Therefore, this feature is not covered under warranty.
Miter Doors
DOCUMENT OF UNDERSTANDING SPECIAL EFFECTS
(continued)
Solid wood doors are affected by temperature and humidity and
will expand or contract, depending on the installed location. These
conditions are inherent in all wood products and will cause a light
line to appear at edges of the center panel. This can easily be touched
up and can be controlled by regulating humidity. This characteristic
is the result of environmental factors beyond manufacturer’s control
and is not considered a defect. Therefore, it is not covered under
warranty.